HomeMy WebLinkAboutInsulation Card 07.26.2017INSULATION CARP - nREMOVE
BASF
The Chemical Company
ICC -EU - 2642
This form must be filled out anti posted to comply with building code and FTC requirements. Meets IRC Section N-1101.4
requirements. Please post near electrical panel.
PLEASE ATTACH PRODUCT TECH AL DA 7/ S 1 � r EF' RE Po NCi
The following spray polyurethane foam insulation system(s) has been installed. Consult international Building Code, Section 2603 Foam
Plastic insulation, International Residential Code (!RC) R314 Foam Plastics, or lnternationai Energy Conservation Code (IECC) Section 102
for specific requirements.
This spray polyurethane foam insulation system has been installed in accordance with manufacturer's processing
Sluldelines to provide a thermal resistance of...
•
Area InsulatedR-Value
Thickness*
Attic Area
R-
@
inches
Sloped Ceilings (L ppm Level)
R- 49,3 3
@
7,25
inches
Walls (Where:
)
R-
@
inches
Walls (Where:)
R-
@
inches
Floors (over an unheated crawl space)
R-
@
inches
-Crawl Space Perimeter
R-
@
inches
Basement Exterior Walls
R-
@
inches i
Other (Where:
)
R-
@
inches
*Nominal thicknesses are representative of a field, spray -applied foam material.
BASF Polyurethane Foam Enterprises Prociuoi:(s) Installed:
(Please Print Clearly)
❑ COMFORT FOAM*
Walls: Permeance:perms at ''thickness Density, Nominal 2#
SPRAYTITEO 15B
Flame Spread Rating (ASTM E-84): ' Class 1 (25 or less) 1-1 Class 2 (75 or less) tested at 4 " thickness**
O COMFORT FOAMQ
Other:
❑ SPRAYTITEo
Flame Spread Rating (ASTM E-84):
Permeance: perms at " thickness Density: Nominal 2#
Class 1 (25 or less) ❑ Class 2 (75 or less) tested at 4 " thickness**
❑ COMFORT FOAMS
Basement Exterior: Permeance: perms at "thickness Density: Nominal 2#
❑ SPRAYTITEa
Flame Spread Rating (ASTM E-84): Not Applicable
(Please Print Clearly)
Jobsite Location: IO �kki�2 14 bate Installed: I:2LO /7
Building Contractor:
Insulation Contractor: ACCIS(Aty-Zi]S(A.LGL. I Cam Phone: G71
Installed By: rii.I, .
Caution— No Hot Work -Polyurethane foam Is combustible and should be treated as such. No welding
or cutting unless foam has been protected from accidental ignition by open flame.
L'ARD - OW REMOVE