HomeMy WebLinkAboutHigh-Stregth Bolt Inspection ReportTinmainls
Fabrication I8 I inspection LLC
Lyle E. Inman 1970-250.4042
PO Box 1325, Palisade CO 81526
allni@q.com
Bella Villa Builders
PO Box 875
Conifer, CO 80433
303-358.8838 Russel Burton
Project: 174 Saddleback Residence
General Contractor: Bella Villa Builders
Sub Contractor: Colorado Steel Works
Dear Mr. Burton,
INSPECTION REPORT-10172024
October 17, 2024
Location: 174 Saddleback, Aspen Glen, CO 81623
RDP: 40th Parallel Structural Engineering
Permit# BLRE-04-24-8609
As requested, structural steel special inspection was conducted per the IBC 2021 Edition- Chapter 17: Structural
Test and Special Inspection and Garfield County requirements. I arrived @ 1500hrs. and Talked to Daniel about
material ready for inspection.
Visual welding inspection was conducted on the following items: Basement Level- Columns: 1) Cl- 3" Sch 40
Pipe (4ea.) Top Cap and Base Plates. 2) C2- 3" Sch 40 Pipe Top Cap and Base Plate. Beams: 1) B 1 - W10x26 to
62- W10x26. 2) 132- Web Stiffners. 3) B3- Web Stiffeners. 4) B4- Web Stiffeners. 5) B4 to B5 Splice 3/8" Splice
Plate. Channel: 1) C4- C6 x 8.2 Channel 2ea. anchored to East and West walls and welded both ends of W10x26
beam. Ground Level- Rigid Frame Assembly. Columns: 1) C3-Vertical W1000 Columns to B6 W1000 Header.
to include web stiffeners. 2) Stub Columns: WC1(4 x 1/4 TS) 4ea. for Timber columns lower. 3) Stub Columns:
WC2 (4 x 1/4" TS) 4ea. for Timber columns upper. Per supplied drawings by Colorado Steel Works Dated: 914/2024.
It was observed that the welding listed above was in compliance with supplied drawings, project specifications
and the visual requirement of Clause 8 & Clause 10 of the AWS D1.1-2020: Structural Welding Code- Steel.
High Strength Bolting to include base plate anchorage was conducted in the Basement level on the 1/2" anchor
rod nuts and the 1/2" ASTM A325 fastener assemblies at the Column top cap connections. I observed all newly
installed fasteners to be in compliance with project specifications and the inspection criteria set forth by the
American Institute of Steel Construction (AISC) Research Council On Structural Connections (RCSC).
ARectfully Submitted,
Inman
AWS CWI#04080191
ICC Certified #10304' 78 / GR, S1 C & SIP
Tinman's Fabrication & Inspection LLC
*Yle- ' nman
cw
QC
1 EXP. 8/1/2025