HomeMy WebLinkAboutApplicationAMGarfield County
Community Development Department
R C �, 109 8'' Street, Suite 401
"�[ f Glenwood Springs, CO 81601
G Ai461Q,': ' (470) 945-8212
(Eft
DEVEL1 W%iy'.jarfieldcountyco.gov
(Eft I ELL i,'L, -
COMWINITY UEVi"D'DNW-:0
TYPE OF CONSTRUCTION
�Q Commercial/Multi-Family
Q Manufactured Home or Tiny Home (Single or Multi -Level)
Residential (SF, Duplex or Townhome)
0 Accessory Dwelling Unit (ADU) - MAXIMUM SIZE OF 1,200 SQUARE FEET
INVOLVED PARTIES
Demolition
Reroof
Property owner: 1 a rnQ� �• a��� ^! Phone: (n- �) (o \ a —3b76
MailingAddress: l
Email Address:�-
Contractor: Phone: 1 9 70_) 6 1
Mailing Address:
Email Address: • nl e d
Architect: Z l-L.� �okN QOL P n t m P & Phone:
Mailing Address: �� C) • o Z. 3
Email Address: C - @ vy,� •ti c 4 w1
Engineer:. -T `�-�V Yiii�urV 'i _ .1 C Phone: ( ICU) 7 7 4"
Mailing Address: �• D. )
Email Address: ` -�'P Q vac " KY-1
Manufactured Home Installer:
Mailing Address:
Email Address:
PROJECT DETAILS
Phone: ( )
Describe Work: 61 Q1 ❑ 5 4-1 -4
H,mr aNA
Job Address: ►"l`��
Assessor's Parcel Number: 10 i 71 Q 8 Z Z.Z
Sub. TOO ` -'i'of Block I" ��� 17 p
Owner's Valuation of Work. $ 7 d . DV Property Size (Sq. Ft. or Acres):
Sq. Ft. of Building: 4 Height: Z S V'j' # of Floors:
Class of Work: ININew Remodel/Alteration Addition
Garage: Attached tache
1
1-
PROJECT DETAILS CONTINUED
Septic:
Type of Heat: InNatural Gas
pane
4 F-1 Community
Electric ❑ Other
Driveway m t Permit #:
Permit: p
NOTICE
Authority. This application for a Building Permit must be signed by the Owner of the property, described above,
or an authorized agent. If the signature below is not that of the Owner, a separate letter of authority, signed by
the Owner, must be provided with this Application.
Legal Access. A Building Permit cannot be issued without proof of legal and adequate access to the property for
purposes of inspections by the Building Division.
Other Permits. Multiple separate permits may be required: (1) State Electrical Permit, (2) County OWTS Permit,
(3) another permit required for use on the property identified above, e.g. State or County Highway/ Road Access
or a State Wastewater Discharge Permit.
Void Permit. A Building Permit becomes null and void if the work authorized is not commenced within 180 days
of the date of issuance and if work is suspended or abandoned for a period of 180 days after commencement.
CERTIFICATION
I hereby certify that I have read this Application and that the information contained above is true and correct. I
understand that the Building Division accepts the Application, along with the plans and specifications and other data
submitted by me or on my behalf (submittals), based upon my certification as to accuracy. Assuming completeness
of the submittals and approval of this Application, a Building Permit will be issued granting permission to me, as
Owner, to construct the structure(s) and facilities detailed on the submittals reviewed by the Building Division. In
consideration of the issuance of the Building Permit, I agree that I and my agents will comply with provisions of any
federal, state, or local law regulating the work and the Garfield County Building Code, OWTS regulations and
applicable land use regulations (County Regulation(s)). All County development requiring a permit, except for
residential uses, are subject to Article 7 of the Land Use and Development Code. I acknowledge that the Building
Permit may be suspended or revoked, upon notice from the County, if the location, construction or use of the
structure(s) and facility(ies), described above, are not in compliance with County Regulation(s) or any other
applicable law.
I hereby grant permission to the Building Division to enter the property, described above, to inspect the work. I
further acknowledge that the issuance of the Building Permit does not prevent the Building'Official from: (1) requiring
the correction of errors in the submittals, if any, discovered after issuance; or (2) stopping construction or use of the
structure(s) or facility(ies) if such is in violation of County Regulation(s) or any other applicable law. Review of this
Application, including submittals, and inspections of the work by the Building Division do not constitute an
acceptance of responsibility or liability by the County of errors, omissions, or discrepancies. As the Owner, I
acknowledge that responsibility for compliance with federal, state and local laws and County Regulations rest with
me and my authorized agents, including without limitation my architect designer, engineer and/ or builder.
I hereby acknowledge that I have read and understand the Notice and Certification above, as well as, have
provided the required information which is correct and accurate to the best of my knowledge.
Property Owner Print and 5i&n Date
OFFICIAL USE ONLY
` /I
L,•
Special Conditions:
see 601\14?1-1701V—Sb
Adjusted Valuation:
5 5c, 605 CO
Plan Check Fee: Permit Fee: Manu. Home Fee:
ZZ . [O 35 l4 .a
Misc. Fees:
Total Fees:
Fees Paid:
Balance Due:
B No:
OW S No:
5-gra. (a
l
205.F r-
ME-011446
Setbacks:
OCC Group: L Const. Type: �C
�
Zo 'ng�
BUILDING / PLANNING DIVISION:
Signed Approval
Date
ENERGY COMPLIANCE SHEET REQUIREMENTS:
Effective June 30, 2023 Please provide details showing how building complies / meets Garfield County's
adopted 2018 IECC and Climate Zone 5.
Depict and show outline the structure's building thermal envelope. Outline should clearly show portions
of the building to be conditioned inside the envelope (and label or otherwise identify any areas remaining
unconditioned outside this envelope)
Energy Compliance Plan should further include:
Chosen Energy Compliance Path
• Prescriptive'. Cross Sections of insulated assemblies including the selected material / R-Value
and U-Values to comply with IRC Table R402.1.2
U-Factor Alternative: Provide a ResCheck Report
Total U-Factor Alternative: Provide software generated submittal design reports and inspection
checklist for any RESNET ERI index or other performance path designs
Air sealing details around openings, pipes, penetrations, joints
Fenestration U-factors
Provide mechanical system design details including proposed efficiency rates, types of equipment, fuel
types, locations
Energy efficient lighting specifications — 90% to be high -efficacy (LED complies)
Manual J Report required for new building structures and new equipment installations.
STRUCTURAL PLANS: Please provide the following information on the structural plans.
• SOILS REPORT - If the project is located in a subdivision with a final plat requiring site specific
soils investigation report or if Structural plans make a specific reference to a soils report, then a
copy of the soils report is required to submit a building permit application.
• Design specifications to include roof and deck snow load, wind and seismic design and frost
depth.
• Foundation plan showing complete footing and foundation dimensions.
• Footing and foundation details specifying reinforcement and referenced on plans.
• Framing plans for each floor level and roof. All beams, columns, joists, rafters and trusses
specified. Pre -manufactured structures require the engineers stamp, signature and date.
Framing /connection details, braced wall lines, shear wall schedule, location and hold downs.
NOTE: If any required information is missing, delays in issuing the permit are to be expected. If
determined by the Building Official that additional information is necessary to review the application
and/or plans for compliance, the application may be placed on hold until the required information is
provided. Work may not proceed without the issuance of a permit.
The Building Division will collect a Plan Review fee at time of application submittal. The permit fee, as
well as any Road Impact fees will be collected when the permit is issued.
The permit application must be signed by the owner or by person having written authority from the owner
to act as their representative.
Building cannot be occupied until a Certificate of Occupancy (CO) is issued. Using the building without a
CO will be considered an illegal occupancy and may be grounds for vacating the premises. (Final/CO
inspection requirements will be attached to your approved field set of plans.)
I hereby acknowledge I have read, understand and will abide by the requirements of this
checklist.
Owner Print:-c�mes�. �A56'WSign: ti te: ft OQ 20as'
IOD]434.
Y
RESIDENTIAL ENERGY EFFICIENCY
R402.1.1 Vapor retarder. Wall assemblies in the build-
ing thermal envelope shall comply with the vapor retarder
requirements of Section R702.7 of the International Resi-
dential Code or Section 1404.3 of the International Build-
ing Code, as applicable.
R402.1.2 Insulation and fenestration criteria. The
building thermal envelope shall meet the requirements of
Table R402.1.2, based on the climate zone specified in
Chapter 3.
R402.1.3 R-value computation. Insulation material used
in layers, such as framing cavity insulation or continuous
insulation, shall be summed to compute the corresponding
component R-value. The manufacturer's settled R-value
shall be used for blown -in insulation. Computed R-values
shall not include an R-value for other building materials or
air films. Where insulated siding is used for the purpose of
complying with the continuous insulation requirements of
Table R402.1.2, the manufacturer's labeled R-value for
the insulated siding shall be reduced by R-0.6.
R402.1.4 U-factor alternative. An assembly with a U-fac-
tor equal to or less than that specified in Table R402.1.4
shall be an alternative to the R-value in Table R402.12.
TABLE R402.1.2
INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT'
CLIMATE
FENESTRATION
SKYLIGHT b
GLAZED
CEILING
WOOD
MASS
FLOOR
BASEMENT'
SLABd
CRAWL
SPACE'
ZONE
UFACTOR°
U-FACTOR
FENESTRATION
RVALUE
FRAME
WALL I
R-VALUE
WALL
RVALUE
WALL
SHGC
R-VALUE VALUE
RVALUE
R-VALUE
& DEPTH
RVALUE
1
NR
0.75
0.25
30
13
3/4
13
0
0
0
2
0.40
0.65
0.25
38
13
4/6
13
0
0
0
3
0.32
0.55
0.25
38
1 20 or 13+5'
8/13
19
5113
0
5/13
4 except
Marine
0.32
0.55
0.40
49
20 or 13+5'
8/13
19
10/13
10, 2 ft
10/13
5 and
Marine 4
0.30
0.55
NR
49
20 or 13+5'
13/17
309
15/19
10, 2 ft
15/19
6
6.30
0.55
NR
49
20+5 or 13+10°
15/20
30,
15/19
10, 4 ft
15/19
7 and 8 1
07___F
0.55
NR
49
20+5 or 13+10'
19/21
38g
15/19
10, 4 ft
15/19
NR = Not Required.
For SI: 1 foot = 304.8 min.
a. R-values are minimums. U-factors and SHGC are maximums. Where insulation is installed in a cavity that is less than the label or design thickness of the
insulation, the installed R-value of the insulation shall be not less than the R-value specified in the table.
b. The fenestration U-factor column excludes skylights, The SHGC column applies to all glazed fenestration.
Exception: In Climate Zones l through 3, skylights shall be permitted to be excluded from glazed fenestration SHGC requirements provided that the SHGC
for such skylights does not exceed 0.30.
c. "10/13" means R-10 continuous insulation on the interior or exterior of the home or R-13 cavity insulation on the interior of the basement wall.
"15/19" means R-15 continuous insulation on the interior or exterior of the home or R-19 cavity insulation at the interior of the basement wall. Alternatively,
compliance with "15/19" shall be R-13 cavity insulation on the interior of the basement wall plus R-5 continuous insulation on the interior or exterior of the
home.
d. R-5 insulation shall be provided under the full slab area of a heated slab in addition to the required slab edge insulation R-value for slabs. as indicated in the
table. 7be slab edge insulation for heated slabs shall not be required to extend below the slab.
e. There are no SHGC requirements in the Marine Zone.
f. Basement wall insulation is not required in warm -humid locations as defined by Figure R301.1 and Table R301.1.
g. Alternatively, insulation sufficient to fill the framing cavity and providing not less than an R-value of R-19.
h. The first value is cavity insulation, the second value is continuous insulation. Therefore, as an example, "13+5" means R-13 cavity insulation plus R-5
continuous insulation-
i. Mass walls shall be in accordance with Section R402.2.5. The second R-value applies where more than half of the insulation is on the interior of the mass wall.
TABLE R402.1.4
EQUIVALENT U-FACTORS'
CLIMATE
ZONE
FENESTRATION
U-FACTOR
SKYLIGHT
U-FACTOR
CEILING
U-FACTOR
WALL FRAME
U-FACTOR
MASS WALL
U FACTORb
FLOOR
U-FACTOR
BASEMENT
WALL
U-FACTOR
CRAWL
SPACE WALL
U-FACTOR
1
0.50
0.75
0.035
0.084
0.197
0.064
0.360
0.477
2
0.40
0.65
0.030
0.084
0.165
0.064
0.360
0.477
3
0.32
0.55
0.030
0.060
0.098
0.047
0.091e
0.136
4 except Marine
0.32
0.55
0.026
0.060
0.098
0.047
1 0.059
0.065
5 and Marine 4
0.30
0.55
0.026
0.060
0.082
0.033
0.050
0.055
6
0.30
0.55
0.026
0.045
0.060
0.033
0.050
0.055
7 and 8
0.30
0.55
0.026
0.045
0.057
0.028
0.050
0.055
a. Nonfenestration U-factors shall be obtained from measurement, calculation or an approved source,
' b. Mass walls shall be in accordance with Section R402.2.5. Where more than half the insulation is on the interior, the mass wall U-factors shall not exceed 0.17
in Climate Zone 1, 0.14 in Climate Zone 2, 0.12 in Climate Zone 3, 0.097 in Climate Zone 4 except Marine, 0.065 in Climate Zone 5 and Marine 4, and 0.057
in Climate Zones 6 through 8.
c. 1n warm -humid locations as defined by Figure R301.1 and Table R301. 1, the basement wall U-factor shall not exceed 0.360.
R-30 2018 INTERNATIONAL ENERGY CONSERVATION CODE®
` ' I I Copyright ®30I I ICC, ALL RIGHTS RESERVED. Accessed by John Plano (jplano@carbondaleco net), (Tam of Carbondale) Order Number ilao7i3ao4 on Aug 13, 2D1 s 07:13 AM (PDT) pursuant to
LillitILIF.11 link' License Agreement wilh ICC. No further reproduction or distribution authonzed Single user only, copying and nenrorking prohibited. ANY UNAUTHORIZED REPRODUCTION OR DISTRIBUTION
IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT, AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER
[eG::a,rfiehd CauntY_
BUILDING DEPARTMENT
108 Eighth Street, Suite 401, Glenwood Springs, CO 81601
Tel: (970) 945-8212
PLAN REVIEW CHECKLIST
Permit No:
Building Issues Planning/Zoning Issues
F.rii,neere Foundation
t� Driveway Permit
Surveyed Site Plan
5epticPermit and Setbacks
✓ Grade/ Topography 30%
At:taCh'Residential Plan Review List
0k Subdivision Plat Notes
Fire Department Review
. Valuation Determination/ Fees
✓
Red Line Plans/ Stamps/ Sticker
Attach Conditions
Application Signed
✓ Energy Compliance Path/Plan Received
Plan Reviewer to Sign Application
Parcel/ Schedule No.
40#Snowload Letter — Manuf. Homes
Soils Report
Prgperty Line Setbacks
h� 35 ft. Stream Setbacks
NA• Flood Plain
c✓ 'Building Height
Zoning Sign -Off
p rr—f] rza ��-k w1F - F�
L64� 3R d Impact Fees
Grade/ Topography 40%
✓ Planning Issues
Subdivision Plat
Description Summary:
:5 Y AU, �rtiuce�
CO 1 T;i Ar N '5 r r�k
Coo�S
Czo{ A�t>jA_4n-rC_ To 'RAC-C
j Aa Garfield County
Community Development Department
108 8th Street, Suite 401
Glenwood Springs, CO 81601
(970) 945-8212
www. ea rf i e l d c o u nt yco.gov
This was submitted under the AuR. 2025 Valuations
Applicant: James Watson Phone:
Project Address: 484 CR 113
Subdivsion: Lot: Block:
Type of Space
Square Feet
VE on
$170.80
Finished Living Space (N/A for Manufactured Homes)
2872
Unfinished Basement
$32.00
Crawl Space
1958
$24.00
Garage (Attached)
449
$32.00
Garage (Detached)
$40.00
Covered Patio/Deck
282
$24.00
Uncovered Patio/Deck
$18.00
Misc:
$0.00
Misc:
$0.00
$optic (O'Arrs)
Fee
New Installation ($600)
:Septic - Major Repair (New System & STA) ($600)
:Septic - Minor Repair (Tank Only) ($200)
Alteration ($200)
Vault & Haul ($75)
$0.00
X.F.
1 17
This Section Determined
Plan Review Fee
by Garfield County 1W. I
$2,284.10
Building Permit Fee
$3,514.00
Manufactured Home Set -Up Fee
Septic Fee (OWTS)
Other (Ex: Road Impact Fee)
Total Fees Due
***All fags arP Pstimates until
$2,703.00
$5,798.10
final plan review is completed***